大连实验台

气瓶柜

您的当前位置: 首 页 >> 产品中心 >> 成功案例

万向抽气罩

  • 产品名称:万向抽气罩

  • 点击次数:437
  • 发布日期:2016-06-25 15:24:23
  • 发布网址:http://www.sy17.cc
  • 更多
  • 在线询价
详细介绍
万向抽气罩 Universal exhaust hood
PP管径110MM万向气罩
·关节:高密度PP材质,可360旋转调节方向,易拆卸、重组及清洗。
·关节及密封圈:不易老化之高密度橡胶。
·关节连接杆:304不锈钢。
·关节松紧旋钮:高密度PP材质,内嵌不锈钢轴承,于关节连接杆锁合。
·气流调节阀:手动调节外部阀门旋钮,控制进入之气流量。
·拱形/杯形集气罩:高密度PP/PC材质。
·伸缩导管:110mmPVC/PP。
·独有360O旋转装置:以固定架为中心最大活动半径可达1600mm。
·固定底座:非粘接而成,模具注塑一体成型,牢度强,不脱底。
110mm-diameter PP universal gas hood:
·Joint: made of high-density PP; rotatable for 360°; easy to disassemble, reassemble and clean.
·Joint and sealing ring: non-aging high-density rubber.
·Joint lever: 304 stainless steel.
·Adjustable joint knob: High-density PP with a molded-in stainless steel bearing and locking with joint lever.
·Airflow control valve: manual adjust the external valve knob to control the air inflow.
·Arch/cup-shaped gas-collecting hood: high-density PP/PC.
·Flexible conduit: 110mmPVC/PP
·Unique 360°rotary apparatus: the maximum action radius centered at the holder can reach 1,600mm.
·Fixed base: Instead of adhesive bonding, it is integrated through mould injection molding with strong fastness and good bottom-off resistance.
管径75MM新型万向气罩
·关节:高强度不锈钢丝与进口尼龙制造,可随意调整角度,易拆卸、清洗。
·管体:采用合金材料制造,美观大方。
·调控装置:采用气动撑杆控制高度,内外合金管伸缩控制长度。
·气流调节阀:手动调节外部阀门旋钮,控制进入的空气流量。
·气流拱形集气罩:高密度PP/PC材质。
·旋转装置:安装了360O旋转装置,以固定架为中心,最大活动半径可达1250mm。
·固定底座:模具注塑一体成型,牢度强,不脱底。
New 75mm-diameter universal gas hood:
·Joint: made of high-strength stainless steel wire and imported nylon; random angle adjustment; easy to disassemble and clean.
·Pipe: made of alloy material with elegant appearance.
·Regulation installation: height is controlled by pneumatic stay bar and length is controlled by the flexible internal and external alloy pipe.
·Airflow control valve: manual adjust the external valve knob to control the air inflow.
·Arch gas-collecting hood: high-density PP/PC.
·Rotary apparatus: the 360°rotary installation enables the maximum action radius centered at the holder reach 1,250mm.
·Fixed base: It is integrated through mould injection molding with strong fastness and good bottom-off resistance.

相关标签:

  • 上一篇:已经没有了
  • 下一篇:已经没有了
  • 二维码.png

    在线客服
    分享